Language: EN
Currency: EUR
  • EUR
  • BGN
Solutions and equipment for measurements and analysis of RF signals, monitoring and encoding

RF2IP - VHF Digital RF Power Monitoring Probe with LAN Connectivity

Code: RF2IP VHF Power Monitor
RF2IP - VHF Digital RF Power Monitoring Probe with LAN Connectivity
Description

RF2IP VHF - Digital RF Power Monitoring Probe with 50MHz - 250MHz frecuency range and LAN Connectivity for easy monitoring of  Forward and Reflected RF Power in a typical directional coupler in transmitters, combiners and antenna systems installation.

The RF2IP VHF Digital Power Probe is the most cost effective solution on the market for easy monitoring of  Forward and Reflected RF Power in a typical directional coupler in transmitters, combiners and antenna systems installation.

Very high measurement precision and a dynamic range, more than 50dB, make this probe the best choice for a remote transmission systems measurements. It is developed for a precise measurement of analog and True Average power for digitally modulated signals.

Top product performance is achieved thanks to the LAN port for full TCP/IP remote control and monitoring, advanced SNMP Ver.2C management and the extremely intuitive embedded WEB server for interactive supervision. It is powered through the LAN cable via PoE (Power over Ethernet) and all calibrations and additional adjustments are performed remotely.

The RF2IP VHF Digital Power Probe comes with easy and flexible real-time monitoring and many other additional features, such as the Factory Parameters Restore option, FTP Server for downloading the measurements log, SNTP for automatic synchronization of the built-in clock, as well as date and time settings in various formats. It supports a variety of transmitter configurations and offers adjustable alarm thresholds for all important parameters. Alarms can be dispatched via E-mail, SNMP Ver.2C and Opticaly isolated GPO.

Combined with a compact and robust aluminum case, this powerful product delivers dependable round-the-clock operation with guaranteed quality.

RF2IP VHF Digital RF Power Probe is an SNMP V.2 enabled telemetry tool all in a class of its own.

 

Features:

· Dual RF Power ports with built-in precise power sensors
· Adjustable MIN/MAX alarms for FWD Power, RFL Power and VSWR
· Adjustable MIN/MAX alarms for Return-Loss and Crest Factor
· IP-based broadcast control for exceptional scalability
· LAN port for full TCP/IP remote control and monitoring
· Very Intuitive Embedded WEB server for interactive supervision
· Advanced monitoring and full control by SNMP Ver.2C
· Alarm dispatch via E-mail, SNMP and GPO
  · Fully DSP based core for a detailed signal analisis
· Proved and reliable hardware for 24/7/365 operating
· Firmware update for future-proof operation
· Attractive price and very good price-performance ratio
· SNTP for automatic synchronization of the built-in clock
· Compact and Robust Aluminum Case for high RF immunity
· Easy Installation and Setup

 

Specifications:
 
- Frequency Range: 50 – 250MHz
- Sensitivity: -50dBm to +10dBm
- WEB interface for full monitoring and control; Interactive and easy to use
- 2 LEDs Indicators on LAN connector
- Interface: Ethernet 10/100 Base-T RJ45 connector (HTTP, SNMP, SMTP, FTP, DHCP)
- Device discovery with UPnP support
- GPO 3 outputs, Open Collector type
- 8GB measurement Storage on a Build-in Memory Card (text, CSV formats)
- BNC Connectors on rear panel for Forward and Reflected RF Power input
- Metering Accuracy: RF Level ±2%
- Readings units: dBm, W or KW (selectable)
 
Series: RF2IP
Product: RF2IP VHF Power Monitor
Frequency range: 50MHz - 250MHz
Dynamic range: >50dB
Channels: 2
Measured parameters: FWD Average, RFL Average, Peak Env, Burst Avg, VSWR, Return Loss, Crest
RF Input Maximum Level: +10dBm
Interfaces: RJ45 10/100
Connector: BNC
Impedance: 50 Ohm
Warranty: 2 years
File Info
RF2IP Brochure [PDF, 3.44 MB]