DP831A Programmable DC Power Supply up to 160W, Rigol
Rigol DP831A - Three channels, programmable DC power supply with up to 160W power- CH1: 0 to 8V/0 to 5A, CH2: 0 to +30V/0 to 2A, CH3: 0 to -30V/0 to 2A.
- Manufacturer: Rigol
- Shipping Weight: 10.000 Kgs
Features:
· 3 Outputs, Max. Power up to 160W
· Low Ripple Noise: <350uVrms/2mVpp
· Excellent Linear Regulation Rate and Load Regulation Rate
· Fast Transient Response Time: <50us
· Channel isolation: CH1 || CH2, CH3
· Standard OVP/OCP/OTP protection functions
· Standard Timing function
· Built in V, A, W measurements and waveform display
· Support Output Delay, Analysis, Monitor, Preset functions
· Independent control for each channel
· 3.5 Inch TFT Display
· Connectivity: USB Host& Device, LAN, RS232, Digital IO, Support USB-GPIB (Opt.)
Specifications:
Model
|
DP831A
|
|||
Channels
|
CH1
|
CH2
|
CH3
|
|
DC Output (0ºC-40ºC)
|
||||
Voltage
|
0 to 8V
|
0 to +30V
|
0 to -30V
|
|
Current
|
0 to 5A
|
0 to 2A
|
0 to 2A
|
|
Overvoltage Protection
|
1mV to 8.8V
|
1mV to 33V
|
-1mV to -33V
|
|
Overcurrent Protection
|
0.1mA to 5.5A
|
0.1mA to 2.2A
|
0.1mA to 2.2A
|
|
Load Regulation ± (output percentage + offset)
|
||||
Voltage
|
<0.01% + 2 mV
|
|||
Current
|
<0.01% + 250 μA
|
|||
Linear Regulation Rate ± (Output Percentage + Offset)
|
||||
Voltage
|
< 0.01% + 2 mV
|
|||
Current
|
< 0.01% + 250 μA
|
|||
Ripple and Noise (20 Hz - 20 MHz)
|
||||
Normal Mode Voltage
|
< 350 μV rms/2 mVpp
|
|||
Normal Mode Current
|
< 2 mA rms
|
|||
Common Mode Current
|
<1.5 μA rms
|
|||
Accuracy 12 Months * (25℃ ± 5℃) ± (output percentage + offset)
|
||||
Programming
|
Voltage
|
0.1% + 20mV
|
||
|
Current
|
0.2% + 10mA
|
||
Read Back
|
Voltage
|
0.1% + 20mV
|
||
|
Current
|
0.2% + 10mA
|
File | Info |
---|---|
![]() |
[PDF, 791.32 KB] |