Idioma: ES
Moneda: EUR
  • EUR
  • BGN
Soluciones profesionales y sistemas completos para radiodifusión de Televisión y Radio

IT-087 Analizador Digital de señal TV QAM

   The IT-087 Digital TV QAM Signal Analyzer is a configuration of the IT-08 Multifunction TV Meter comprised of MB-08 Base Unit and MC-087 Removable Module. IT-087 is designed to ensure high-performance control and adjustment of television and broadcasting distribution networks as well as of separate components of such networks, or other electronic devices. The Meter allows measurement of DVB-C signal parameters and analog signals. IT-087 is capable to satisfy all your measurement needs for high-quality operation within the range of 45 to 865 MHz.








o   lightweight and compact handheld design

o   measurement modes:

·         BER/MER mode performs measurements of DVB-C channels and indicates results on a bar-graph or a constellation diagram

·         SPECTRUM mode provides the scanning of entire band with the span defined by the user from 18 to 72 MHz

·         SCAN, TILT and RIPPLE modes indicate the level of all the channels present in the band (or channels according to the channel plan) on a bar-graph

·         SCAN, TILT and RIPPLE modes indicate the level of all the channels (or channels according to the channel table), present in the band, on a bar-graph display and provide the tuning of channel levels

o   LEVEL measurements:

·         for analog channels: channel level, Carrier to Noise (C/N) ratio, Video to Audio (V/A) ratio

·         for digital channels: channel power, Carrier to Noise (C/N) ratio.

o   measurement of reception quality parameters of digital channels:

·         modulation error rate (MER)

·         bit error rate (BER) before and after Reed-Solomon decoder

·         channel carrier frequency offset from the tuning frequency

o   data logger function providing storage for:

·         up to 32 channel plans (with channel names) and automatic channel plan creation. Automatic search for digital channel parameters (modulation type, symbol rate)

·         up to 200 measurement logs (each indicating channel levels, C/N and V/A ratios), checking the parameter compliance with the limit plan and saving comments and measurement date and time. For digital channels channel power within bandwidth, S/N ratio, BER, and MER are measured

·         up to 200 spectrum analyzer logs with 125 kHz step, adjustable scanning span and saving comments and measurement date and time. Saving up to 14 spectrum logs within the full frequency range

o   analog channels audio reproduction with internal speaker

o   measurement of AC/DC input voltage within the range of 10 to 100 V

o   operation with PC for access to additional modes:

·         performing all kinds of measurements

·         viewing and editing channel plan pages

·         updating software and firmware

·         editing channel template



Frequency tuning range 5 to 900 MHz
Operating frequency range 45 to 865 MHz
Resolution 125 kHz
Built-in attenuator 20, 40 dB
Input mismatch attenuation
  • Input attenuator off
  • Input attenuator on


  • 14 dB
  • 18 dB
level measurement range
  • input attenuator is off
  • 20 dB input attenuator is on
  • 40 dB input attenuator is on


  • 30 to 80 dBμV
  • 50 to 100 dBμV
  • 70 to 120 dBμV
Measurement level resolution 0.1 dB
Accuracy within 30-120 dBµV level range ±1.5 dB
Accuracy at operating temperature ±2.2 dB
Measurement channel passband for -3 dB level 230 ± 60 kHz
Input signal modulation QAM 64, 128, 256
Symbol rate 5.000 to 7.000 MSps
MER measurement range 20 to 40 dB
MER measurement resolution 0.1 dB
MER measurement accuracy ±2.0 dB
BER measurement range
  • BER before Reed-Solomon decoder
  • BER after Reed-Solomon decoder


  • 4.0x10-3…1.0x10-8
  • 1.0x10-4…1.0x10-8
DVB-C channel real power threshold (preBER < 2.0x10-4) 50 dBμV
Frequency auto tuning step ±0.5 MHz
Warm-up time 10 min
Battery duration under normal conditions (2100 mAh battery capacity) 6 hours

































o   performing all kinds of measurements

o   viewing  and saving data logger pages

o   editing channel plans

o   saving and documenting measurement results