Idioma: ES
Moneda: EUR
  • EUR
Soluciones y equipamiento para mediciones de señales de RF, supervisión y codificación.

Noticias

  Actualizaciónes gratuitas para la serie SDS2000X

Fecha: 04 Abr 2016

Lleve gratis actualización para mas Ancho de banda u Opciones antes de que se termine la oferta!

 

 

Llévese una actualización gratuita de ancho de banda más amplio con la compra de un nuevo osciloscopio de la serie SDS2000X

MODELO PRECIO (NETO) QUE OBTIENES? AHORRO
SDS2072X (70 MHz) €789 SDS2102X (100 MHz) €200
SDS2102X (100 MHz) €989 SDS2202X (200 MHz) €386
SDS2202X (200 MHz) €1375 SDS2302X (300 MHz) €530
SDS2302X (300 MHz) €1905 SDS2302X (300 MHz)+ 4 Optiones €752
SDS2074X (70 MHz) €1099 SDS2104X (100 MHz) €306
SDS2104X (100 MHz) €1405 SDS2204X (200 MHz) €464
SDS2204X (200 MHz) €1869 SDS2304X (300 MHz) €660
SDS2304X (300 MHz) €2529 SDS2304X (300 MHz)+ 4 Optiones €752

 

 

 

 

 

 

 

 

 

 

 

 OptionеsSPL2016, SDS-2000X-16LA, SDS-2000X-FG, SDS-2000X-DC

 

Compre 2 opciones, llévese las 4

OPTIONES

COSTO ESTÁNDAR

PRECIO (NETO)

        AHORRO 

SPL2016

€335

 

€434

 

 

€318

SDS-2000X-16LA

€99

SDS-2000X-FG

€159

SDS-2000X-DC

€159

 

 

 

 

 

 

 

Detalles de las opciones:

SERIES CODIGO

CONTENIDO

DESCRIPCIÓN

SDS-2000X-FG

Licensia

25 MHz function/arbitrary waveform generator

SDS-2000X-DC

Licensia

IIC, SPI, UART/RS232, CAN, LIN serial decoder

SDS-2000X-16LA

Licensia

16 Digital Channels (Software)

SPL2016

Sonda lógica

16-Channel Logic Probe,500 MSa/s, 14 Mpts/CH

 

 

 

 

 

 

 

Para mas información: info@rtelecom.net

  Oferta opciones para DS/MSO2000A y DS/MSO4000

Fecha: 11 Ene 2016

Oferta conjunto opciones para DS/MSO2000A Series

 

Para un tiempo limitado, RIGOL ofrece una compra uno – recibe todo promoción de opciones para la serie 2000.

 

·Compra la opción conjunto (BND) para habilitar todas estas funciones:

  • ·239€, ahorra 837€
    • -Serial Decode
    • -Extended Memory
    • -Advanced Triggering
    • -CAN Triggering and decode
    •  
    • Compra opción BND-MSO/DS2000A239€
    • *El nivel mínimo de firmware es 00.03.03.02.06

 

 

Oferta conjunto opciones para DS/MSO4000 Series


Para un tiempo limitado, RIGOL ofrece una compra uno – recibe todo promoción de opciones para paquetes de decodificador de serie.

 

·Compra una opción de decodificador de serie para habilitar todos los estándares admitidos:

  • ·549€. Ahorra 2333€
    • -I2C
    • -SPI
    • -RS232
    • -CAN
    • -FlexRay
    •  
    • 549€Compra opción BND-MSO/DS4000*
    • *El nivel mínimo de firmware es 00.02.02.04.03

 

 

GRATUITA actualización de ancho de banda:

                                                     para osciloscopios DS/MSO4000

-Compra un 200MHz osciloscopio y obtenga actualización gratuita a 350MHz

-Compra un 350MHz osciloscopio y obtenga actualización gratuita a 500MHz

 

La oferta termina el 31 de marzo, 2016

  DG4000 Promoción- Extender el ancho de banda

Fecha: 30 Sep 2015

Precio Promocional !!!
 

(Precios sin IVA)


DG4062 está a 749,-€. Añade 49,-€ y llevate un DG4102 por solo 798.-€, en lugar de 939.-€.      !!! 15% mas barato !!!

Añade 79.-€ al precio original de DG4102 y llevate un DG4162 por solo 1018.-€ en lugar de1221.-€.        !!! 16% down !!!

 

Esta promoción es válida hasta finales de este año (31 de diciembre 2015).

 Nuevo Arb. Generador de funciones DG4202

Fecha: 30 Sep 2015

La serie DG4000 consigue un nuevo miembro - el DG4202.
Ofrece el mismo rendimiento excelente y mejora la cobertura de frecuencias de hasta 200 MHz.
La última hoja de datos actualizada se puede descargar aquí.

Precio: 1679,- € sin IVA

 Introducción de un nuevo producto- RF Generador serie DSG800

Fecha: 30 Sep 2015

La serie DSG800 es el nuevo miembro de los generadores RF de Rigol.
 
Está disponible con 1,5 GHz y 3 GHz de ancho de banda. Aquí encontraran la última ficha técnica.
 
Precios:
DSG815 - 1880,- € sin IVA
DSG830 - 3380,- € sin IVA
 
Hay tres opciones disponibles:
 
-Pulse Modulation DSG800-PUM
-Pulse Train Generation DGS800-PUG
-High Stable Clock  OCXO-B08

 Introducción de nuevos productos - Versión DP800

Fecha: 30 Sep 2015

Nos complace anunciar las "nuevas" versiones DP831, DP821 y DP811 de Rigol.

La serie DP800 es una familia de sistemas de fuentes lineales de alimentación con 1, 2 o 3 salidas y hasta 200W en total.

Precios:
DP831 (no A)    419,-€ sin IVA
DP821 (no A)    549,-€ sin IVA
DP811 (no A)    549,-€ sin IVA

  ¡Ahorra hatsa 2333€ ó 80% con las series DS2000A y DS4000!

Fecha: 19 Sep 2015

Obtened paquete de todas las opciones al precio de uno en osciloscopios de series DS2000A y DS4000!

 

DS/MSO2000A Series Bundled Option Promotion

The best value for embedded debug just got even better. For a limited time RIGOL is offering a buy one – get all promotion on our 2000 Series Options

  • Buy the bundle option to enable all of these capabilities
  • 239€, save 837€
    • Serial Decode
    • Extended Memory
    • Advanced Triggering
    • CAN Triggering and decode
  • Purchase option BND-MSO/DS2000A*
  • 239€

* minimum firmware level is 00.03.03.02.06

 

 

DS/MSO4000 Series Bundled Option Promotion

The best value for embedded debug just got even better. For a limited time RIGOL is offering a buy one – get all promotion on our serial decode packages

  • Buy one serial decode option to enable all supported standards
  • 549€. Save 2333€
    • I2C
    • SPI
    • RS232
    • CAN
    • FlexRay
  • Purchase option BND-MSO/DS4000*
  • 549€

* minimum firmware level is 00.02.02.04.03

 

  SIGLENT Technologies anuncia el lanzamiento de los productos de la serie X

Fecha: 28 Ago 2015

The newly introduced X-Series products include the SDS1000X Series Super Phosphor Oscilloscopes based on our SPO technology, the SDG2000X Series Function/Arbitrary Waveform Generators based on SIGLENT’s TrueArb technology, and High-Precision SPD3303X Programmable Linear DC Power Supply. All X-Series products support LAN interfacing for use in remote-controlled measurement systems.

 

X-Series products adopt SIGLENT’s newly developed architecture platform which makes for a more versatile and powerful operating experience.

SDS1000X Series Super Phosphor Oscilloscopes based on SPO technology

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The new SDS1000X Series Super Phosphor Oscilloscope is available with a maximum bandwidth of 200 MHz, 1GSa/s sampling rate and 14Mpts memory depth. Also, the SDS1000X family utilizes SIGLENT’snew generation of SPO technology, which means high waveformcapture rate, 256-level intensity grading and color temperature display, digital triggeringand long memory depth.The SDS1000X includes many other features such as rich intelligent triggering, serial bus triggering and decode, History and Sequence function, abundant measurements and math functions, 16 digital channels, and an integrated 25 MHzDDS Arbitrary Waveform Generator. Now you can get these powerful features at a budget price. The SDS1000X was primarily designed for education and entry-level engineering markets. Design layout is enhanced by a minimalist styling and 10 types of 1-button shortcuts.

 

SDG2000X Series Function/Arbitrary Waveform Generators based on TrueArb technology

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SIGLENT’s new SDG2000X Series of dual-channel Function/Arbitrary Waveform Generators come in maximum bandwidth to 120 MHz and high-performance sample rates of 1.2 GSa/s as well as 16 bit vertical resolution. Besides traditional DDS technology, the SDG2000Xalso adopts innovative TrueArb and EasyPulse technology. Therefore the SDG2000Xcan outputhigher-fidelity, lower-jitter signals, and meets a wider range of applications needs.

 

Innovative TrueArb Technology

With SIGLENT’s TrueArb technology, you get all of the advantages of DDS technology while overcoming the DDS limitations of jitter and distortion. Because TrueArb technology outputs every arbitrary waveform stored in memory point-by-point it won’t miss or recopy any data point and can accurately produce arbitrary waveforms while maintaining low jitter (< 150 ps).

 

Innovative EasyPulse Technology

In a conventional DDS technology signal source, the pulse width, rise / fall time of the pulse waveform is affected by the current output frequency, can cause serious limitations on the desired parameters,and can cause an output waveform with unacceptable jitter.SIGLENT’s SDG2000XSeries Function/Arbitrary Waveform Generator is basedon EasyPulse technology and overcomes this problem. Pulse/Square waves exhibit low jitter levels (min. up to 8.4 nsec). At the same time, the pulse width, rise / fall time maintain large adjustment range.

 

High-Precision SPD3303X Series Programmable Linear DC Power Supplies

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The new SPD3303X Series Programmable Linear DC Power Supplies include two models, SPD3303X and SPD3303X-E. Compared with SPD3303 Series, all the SPD3303X series support LAN interfacing for use in remote-controlled measurement systems.

The SPD3303X includes many other features as below:
- 3 independent control and isolated output: 32V/3.2A*2, 2.5V/3.3V/5V/3.2A*1, total power 220W  
- Max 5 digits voltage and 4 digits current display, resolution: 1mV, 1mA
- 3 types of output modes: independent, series and parallel
- 4.3 inches TFT-LCD display with 480*272 resolution
- 100V/120V/220V/230V compatible design to meet the need of different grids
- Intelligent temperature-controlled fan, effectively reducing noise

 Nuevо Аnalizador de Redes alto rendimiento, de CMT

Fecha: 31 Jul 2015

Copper Mountain Technologies (CMT) introduced a new series of high-performance vector network analyzers (VNAs) designed to efficiently handle advanced test applications at the 2015 International Microwave Symposium (IMS) in Phoenix on May 17-22. The Cobalt series, which presently features the C1220 and C1209 models, offers an unmatched price-performance combination for S-parameter measurement between 100 kHz and 20 GHz.

To achieve high performance and an affordable cost, the design and production of Cobalt VNAs incorporates several new proprietary manufacturing and test approaches. Innovative new test grade coaxial connector technology for internal interconnect and tighter tolerances contribute to Cobalt’s exceptional metrological accuracy. Advanced electromagnetic modeling optimizes the 20 GHz Cobalt’s ultra-wideband directional coupler design, and new production methods for precision airstrip lines give the directional couplers extraordinary stability, both over temperature and over very long intervals of time.

In addition, Cobalt’s hybrid dual-core DSP+FPGA signal processing engine, combined with new frequency synthesizer technologies, propel Cobalt’s measurement speed to among the most advanced instruments in the industry, and well past the achievements of any cost-competitive products. These extremely fast measurement speeds and compact design make Cobalt VNAs optimal for engineers looking for fast production and BTS filter tuning applications without requiring a lot of space.

The top-of-the-line C1220 analyzer boasts a frequency range of 100 kHz – 20 GHz. It offers a typical dynamic range of 145 dB, an output power adjustment range of -60 dBm to +10 dBm, and measures up to 500,001 measurement points per sweep. C1220 can reach a measurement speed of 10 microseconds per point and has dimensions of 14.8" x 16.3" x 5.5" (376 x 415 x 140 mm).

The C1209 features many of the same technical specifications and is capable of analyzing the frequency range from 100 kHz to 9 GHz. With dimensions of 14.8" x 8.3" x 3.7" (377 x 210 x 95 mm) and a weight of just 4.8 kg, the smaller C1209 is about a “half rack” in width.

Like all VNAs in the Copper Mountain Technologies portfolio, Cobalt VNAs are PC-driven, meaning the design separates the measurement module from the processing module so that its proprietary software can offload processing of the measurement results to an external PC. This allows for improved processing power, better display capabilities and more reliable performance. Copper Mountain Technologies also offers customers a wide range of standard features that include time-domain with gating, fixture simulation (embedding and de-embedding) and frequency offset mode for mixer/converter testing.

  Actualizaciones y Paquetes de SW para la Serie MSO/DS4000

Fecha: 15 May 2015

Rigol Technologies EU GmbH extends the capability of their Mid and High Range Oscilloscope Series DS/MSO4000 and offers now the possibility to upgrade the oscilloscope bandwidth via software code license.


Users can now start with a lower cost solution of the MSO/DS4000 family and can extend it based on future needs or applications. For enhanced application and measurement needs they can get much higher instrument bandwidth through an easy to handle software code upgrade. A typical need for bandwidth upgrade could be the need of higher pulse slope for higher speed serial bus or faster frequency test signals in the future.

Rigol offers three upgrade options for both, DS models (Digital Storage Oscilloscopes) and MSO models (Mixed Signal Oscilloscopes) of the 4000 Series.

These extensions are also available for the installed base of instruments in the field. In this case it is mandatory that the latest Firmware is installed.

The following three upgrades are available:

BW2T3-MSO/DS4000
Bandwidth Upgrade from 200 MHz to 350 MHz for models MSO/DS402x (2/4 channel)

BW2T5-MSO/DS4000
Bandwidth Upgrade from 200 MHz to 500 MHz for models MSO/DS402x (2/4 channel)

BW3T5-MSO/DS4000 
Bandwidth Upgrade from 350 MHz to 500 MHz for models MSO/DS403x (2/4 channel)

Users in the education and university area but also industrial customers in R&D or test labs can now verify and evaluate a low cost Rigol oscilloscope to get a first experience, and can then share the results about the high quality and excellent service of Rigol’s products with all responsible persons. Later they can decide to upgrade to a higher bandwidth to address more complex applications. So there is no risk to lose money when they make a decision for Rigol instruments.

Buy one - Get all

In addition, Rigol Technologies will promote the complete software package at the price of the lowest option for a limited time. For the MSO/DS4000 series the following options are included for decoding the serial buses RS232/UART, I2C, SPI, CAN und FlexRay. Customers can save up to € 2333.

BND-MSO/DS4000
including SD-RS232-DS4000, SD-I2C/SPI-DS4000, SD-CAN-DS4000 and SD-FlexRay-DS4000 for only € 549,00 net.

This promotion is valid from now and ends on December 31, 2015

The users can now get the complete serial bus decoding set without any additional cost and are well prepared for future needs of coming applications. The bundle can be purchased directly with a new product, or you can buy it separately for installation on older scopes to upgrade them with these options. Already today, this package covers your future needs without any additional cost and risk. Both options require the latest firmware release to be installed on the oscilloscope before you can use them.

With these options and packages, Rigol demonstrates their best price/performance ratio and affordable prices. Customers can evaluate without any risk, and in combination with Rigol’s standard 3 year warranty they are well prepared for future needs.

« 12 3 4» Página 2 de 4