Language: EN
Currency: EUR
  • EUR
  • BGN
Professional complete systems and solutions for Television and Radio Broadcasting

Planar IT-100 Multisystem TV Signal Analyzer

Code: Planar IT-100
Planar IT-100 Multisystem TV Signal Analyzer

Planar IT-100 is a TV Signal Multisystem Analyzer for measurements of signal parameters of Digital and Analog TV with possibility of remote access and control. The analyzer can be used for the checking of coaxial cables, fiber-optic or IP networks for receiving television and radio broadcasting or separate elements of network building and other radio electronic devices. The supported standards are DVB-C, DVB-T, DVB-T2, DVB-S, DVB-S2, IP-TV, ATV. 

  • Manufacturer: Planar
  • Shipping Weight: 2.500 Kgs
Price excl. VAT: €2.495,00
Price inc. VAT: €2.994,00

Measuring TV signals parameters:

  • - Terrestrial digital TV broadcasting: support for DVB-T, DVB-T2 standards.

Measured parameters: power, MER, BER, constellation diagram, echo diagram, error analysis over time.

  • - Cable digital television: support for DVB-C, ITU-T J.83 Annex B, C standards.

Measured parameters: power, MER, BER, constellation diagram, error analysis over time.

  • - Satellite broadcasting digital television: support for DVB-S, DVB-S2 standards.

Measured parameters: power, MER, BER, constellation diagram, error analysis over time.

  • - IP digital television: support for UDP and RTP protocol, reception of the Transport Stream through unicast and multicast (IGMPv2).

Measured parameters: average bitrate, number of lost packets (for RTP), jitter of packets arrival interval.

  • - Analog television: support for PAL, SECAM, NTSC standards.

Measured parameters: Level, Video/Audio, Carrier/Noise (inband and outband of video signal), modulation depth, unwanted modulation level (HUM), CSO&CTB distortion components level.


Additional features of the IT-100 analyzer:

  • Monitoring of TV picture and audio:
    • - Monitoring of PAL, SECAM, NTSC analog channels
    • - Monitoring of radio FM stations
    • - Monitoring of digital channels with MPEG-1, MPEG-2, MPEG-4, H.264 encoding with SD or HD resolution
    • - Monitoring of encrypted programs when installing the CAM module (with CI interface)
    • - Monitoring of IPTV channels
  • MPEG Transport Stream analysis:
    • - Three-level analysis for compliance with the TR101290 requirements
    • - Real-time analysis
    • - Recording a transport stream to a file for further analysis
  • Support of measurements in fiber optic cable network:
    • - Built-in optical receiver with a frequency range up to 2150MHz
    •  -Support of all measurements from the optical input
    • - Measurement of optical signal power
    • - Operating in the wavelength range from 1100 to 1650 nm
    • - Replaceable FC and SC adapters of the input optical connector
  • Power supply of external devices:
    • - Built-in remote feeding power supply from 5 to 24V
    • - Support for DiSEqC protocol level 2.1
    • - 5W power of remote feeding power supply
    • - Measurement of DC and AC voltage on the input RF connector
  • Interface Support:
    • - USB 2.0 device for connecting the analyzer to a personal computer
    • - USB 2.0 host for connecting FLASH drives
    • - ETHERNET RJ45 10 / 100M for software updates, remote control and IPTV operation
    • - PCMCIA port for connecting a CAM module
Series: IT Serie
Product: Planar IT-100
Frequency range: 5 - 2150MHz
Dynamic range: 20 - 120 dBμV
Measured parameters: DVB-C, DVB-T, DVB-T2, DVB-S, DVB-S2, IP-TV, ATV
Display: 4.3 inches
Screen resolution: 480x272 px
Connector: F type
Operating Voltage: 12 V
Impedance: 75 Ohm
Warranty: 2 years